" Air Dryers Manufacturers,Gas Dryers Manufacturers,Air Dryers Supplier,Gas Dryers Supplier

screw air compressors manufacturer, screw air compressors supplier

OUR PRODUCTS

Air Compressors

Air and Gas Dryers

Air Receiver

Automatic Drain Valve

Aftercoolers

Compressed Air & Gas Filters

Cooling Towers

Heatless Air Dryers

Moisture Separators

air dryers manufacturers, air dryers exporter


Home	Profile	Infrastructure	Contact	Enquiry

Air and Gas Dryers »

We offer high-pressure compressor dry air systems. All these systems are produced for air blast circuit breaker operations for utilities in remote installations. These critical facilities require maximum reliability. We have developed our own dryers in order to provide a high quality drying technology, incorporating the proven components, processing process and quality control procedures as complete packaged compression systems. Reliability and quality of the product is enhanced through custom design.

Refrigeration Compressed Air & Gas Dryers - Marco Polo Series

WINAIR offers world class energy efficient Dryers in collaboration with MTA (Italy)

Sophisticated mathematical and solid modeling software techniques have allowed MTA designers to realize the "Marco Polo" dryers which exclusively combines the advantages of thermal mass and direct expansion systems for heat transfer, from compressed air to refrigerant, in one unit. This special design allows the refrigerant compressor to run only when it's needed; thereby, together with the air-to-air pre-cooling exchanger, offers a consistent energy savings.

Technical Specification

Model MP	Air flow rate (1)	Nominal absorbed power (3)	Maximum absorbed power (5)	Power supply	Air connec- tions	Overall dimensions (7) (mm)							Weight (8)
Model MP	cfm	kW	kW	V/Ph/Hz	Air connec- tions	A	B	C	D	E	F	G	Weight (8)
5MP0070	25	0.15	0.20	230/ 1/50	1/2''	530	300	510	104	60	165	41	35
5MP0120	42	0.18	0.32	230/ 1/50	1/2''	530	300	510	67	400	225	41	39
5MP0160	57	0.29	0.37	230/ 1/50	1/2''	530	300	510	67	400	225	41	41
5MP0270	95	0.39	0.44	230/ 1/50	3/4''	650	370	750	100	476	360	41	65
5MP0480	170	0.55	0.72	230/ 1/50	1''	650	370	750	100	476	360	41	80
5MP0600	212	0.82	1.10	230/ 1/50	1''	780	370	850	213	498	360	41	103
5MP0900	318	0.84	1.10	230/ 1/50	1 1/2''	780	735	940	84	608	447	51	167
5MP1200	425	1.10	1.60	230/ 1/50	1 1/2''	780	735	940	84	608	447	51	189
5MP1600	565	1.85	3.00	400/ 3/50	2''	865	1017	1100	102	656	445	51	264
5MP1900	671	2.22	3.60	400/ 3/50	2''	865	1017	1100	102	656	445	51	293
5MP2400	848	3.16	5.00	400/ 3/50	2''	865	1317	1100	102	656	445	51	393
5MP3000	1060	3.55	6.00	400/ 3/50	PN16 DN80	962	1590	1567	149	656	1100	95	650
5MP3500	1236	4.57	6.90	400/ 3/50	PN16 DN80	962	1590	1567	149	656	1100	95	770
5MP4400	1555	6.11	8.20	400/ 3/50	PN16 DN100	962	1810	1567	149	656	1100	95	930

For calculating performance in different conditions from the above use the correction factors listed below only as a guide and quick reference. Capacity correction factors (indicative values) - Capacity - rated value x P1 x T1 x T2

Working air pressure	Barg / psig	3/ 46	4/ 62	5/ 77	6/ 93	7/ 108	8/ 124	9/ 139	10/ 155	11/ 170	12/ 186	13/ 201	14/ 217	15/ 232	16/ 248
Working air pressure		0.69	0.80	0.88	0.95	1.00	1.05	1.09	1.14	1.17	1.20	1.25	1.30	1.35	1.40
	P1

Ambient temp.		°C/F	20/68	25/77	30/86	35/95	40/104	45/113	50/122
		T1	1.09	1.00	0.93	0.90	0.87	0.78	0.75

Compressed air inlet temperature		°C/F	30/86	35/95	40/104	45/113	50/112	55/131	60/140	65/149	70/158
		T2	1.27	1.00	0.88	0.79	0.68	0.57	0.51	0.47	0.43

Technical Features

The airflow rates shown refer to the free air output from the compressor (suction 20°C and 1 bar absolute) and at the following rated operating conditions : Compressed air inlet temperature 35°C, ambient temperature 25°C and pressure dewpoint from 3°C to 10°C, inlet air pressure 7 barg. The refrigerant used is R134a.
The airflow rates shown refer to the free air output from the compressor and the following rated operating conditions : Compressed air inlet temperature 100°F. Ambient air temperature 100°F. Inlet air pressure 100 psig. Pressure dewpoint from 38°F to 50°F. The refrigerant used is R134a.
Absorbed power at rated operating conditions, see item (1)
Absorbed power at rated conditions (see note 2) and at 115/1/60 and 460/3/60 power supply.
Absorbed power at maximum limit operating conditions (ambient temperature 50°C and pressure dewpoint 10°C).
Absorbed power at maximum limit operating conditions (ambient temperature 122°F and pressure dewpoint 50°F) and at 115/1/60 and 460/3/60.
The dimension refer to the version with a timed drain, not with the zero air-loss drain.

Available Models
(*) Also available : Model 6MP0170 and 6MP0210 with 230/1/60.
Model 6MP0315 with 230/1/60 and 230/3/60.
Model 6MP0425 with 230/1/60.
Model 6MP0565 with 230/3/60.

Maximum room temperature 50°C (122°F).
Maximum inlet temperature 70°C (158°F).

Request a Quote

Refrigeration Compressed Air & Gas Dryers - Magelleno Series

Airflow capacity from 22 to 190 m3/min FAD 20°C WINAIR offers world class energy efficient Dryers in collaboration with MTA (Italy)

Technical Specification

Model	Airflow rate (1)		Nominal power (2)	Air connections	Overall dimensions			Weight (3)
Model	m3/min.	m3/h.	kW	Air connections	A	B	C	kg
MG 022	22	1320	2.14	DN 80	660	1230	1400	244
MG 028	28	1680	3.35	DN 80	660	1230	1400	254
MG 037	37	2220	3.77	DN 80	660	1230	1400	276
MG 045	45	2700	5.05	DN 100	660	1230	1400	318
MG 060	60	3600	7.09	DN 100	660	1230	1400	332
MG 077	77	4620	8.12	DN 150	910	1790	1447	526
MG 090	90	5400	9.69	DN 150	910	1790	1447	551
MG 110	110	6600	11.88	DN 150	910	1790	1447	624
MG 150	150	9000	15.32	DN 200	930	2860	2064	1077
MG 190	190	11400	19.72	DN 200	930	2860	2064	1102

Technical Features

Date refer to compressor free air delivery (suction at 1 bar, 20°C) and the following conditions: working pressure 7 bar inlet air temperature 35°C, ambient temperature 25°C and PDP 3°C in compliance with ISO 7183.
Compressor power absorbed at nominal operating conditions.
Net weight

Maximum inlet air pressure 12 bar g; maximum inlet air temperature 65°C; maximum operating ambient temperature 43°C.
Power supply : 400 V +/- 10% / 3ph / 50Hz

Available in 60 Hz version. (460/ 3/ 60).
Version with water cooled condenser also available.

Selection software to calculate the performance in conditions different from those indicated is also available. As a general guide, it is possible to use the following correction coefficients.

Capacity correction factors (indcative values) : Capacity - rated value (7 bar) x K1 x K2 x K3 x K3 x K4.

Working pressure		barg	3	4	5	6	7	8	9	10	11	12
		K1	0.69	0.80	0.88	0.95	1.00	0.05	0.09	1.14	1.1	1.20

Compressed air inlet temperature		°C	30	35	40	45	50	55	60	65
		K2	1.26	1.00	0.9	0.74	0.61	0.52	0.49	0.47

Ambient temperature		°C	20	25	30	35	40	43
		K3	1.08	1.00	0.95	0.93	0.88	0.83

Dewpoint		°C	3	4	5	6	7	8	9	10
		K4	1.00	1.07	1.17	1.18	1.24	1.32	1.38	1.47

Request a Quote

OUR PRODUCTS
Air Compressors	Air and Gas Dryers	Air Receiver	Automatic Drain Valve	Aftercoolers
Compressed Air & Gas Filters	Cooling Towers	Heatless Air Dryers	Moisture Separators

Home | Profile | Infrastructure | Contact Us | Enquiry